Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECHX clone of ROYMECH

Click arrows to page adverts




These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.

Home

Tables providing information on steel sections

The tables below are for initial reference only.    I have extracted the information from reference sources which may not be in accordance with the latest Standards - as identified.  I am in the process of checking this information....The links below provide much safer information... Corus is definitive for the UK and the spreadsheets provided by Technouk are excellent

Torsion Factors are only included in the tables below for the hollow sections.
For UB/UC/Joists/Channels and some Tee sections Torsion/Bucking/ or Warp Factors are available on webpages linked from Torsion

Universal Beams Dimensions Properties. BS 4-1:1971(Superseded by BS 4:-1  2005)
Universal Beams Dimensions/Properties   BS 4 Part 1: 2005
Equal Angles (Imperial) Dimensions Properties. BS 4-1:1971
(Superseded by BS 4: 1993)
Equal Angles(Metric) Dimensions/Properties   BS 4848-4 :1972
(Superseded by BS EN 10056-1:1999)
Equal Angles(Metric) Dimensions/Properties   BS EN 10056-1:1999
Unequal Angles(Imperial) Dimensions....... Properties. BS 4-1:1971
(Superseded by BS 4: 1993)
Unequal Angles(Metric) Dimensions/Properties   BS 4848-4 :1972
(Superseded by BS EN 10056-1:1999)
Unequal Angles(Metric) Dimensions/Properties   BS EN 10056-1:1999
Channels Dimensions Properties BS 4-1:1971
(Superseded by BS 4: 1993)
Channels Dimensions/Properties   BS 4: 1993
Joists Dimensions Properties BS 4-1:1971
(Superseded by BS 4:-1 2005)
Joists Dim_Properties   BS 4-1:2005
Universal Columns Dimensions Properties BS 4-1:1971
(Superseded by BS 4:-1 2005)
Universal Columns Dimensions_Properties   BS 4:Part 1 2005
Universal Bearing Piles Dimensions_Properties   BS 4:Part 1 2005
Tee Sections Dimensions Properties BS 4-1:1971
(Superseded by BS 4: 1993)
L.S. Tee Sections Dimensions Properties BS 4-1:1971
(Superseded by BS 4: 1993)
Tee Bars Dimensions Properties BS 4-1:1971
(Superseded by BS 4: 1993)
Tees cut from U.Beams Dim_Properties   BS 4:Part 1 2005
Tees cut from U.Columns Dim_Properties   BS 4:Part 1 2005
Tees cut from Joists) Dim_Properties   BS 4: 1993-
(Superseded)
Hollow Square Section - Cold Formed Dimensions/Properties   BS EN 10219:1997
Hollow Rectangular Section - Cold Formed Dimensions/Properties   BS EN 10219:1997
Hollow Square Section - Hot Formed Dimensions/Properties   BS EN 10210:1997
Hollow Rectangular Section - Hot Formed Dimensions/Properties   BS EN 10210:1997
Parallel Flange Channel Dimensions/Properties   BS 4 part 1:2005
Round Bar Round bar Properties    
Square Bar Square bar Properties    
Rectangular Bar Rectangular bar Properties    
Cold Formed Circular Sections Dimensions/Properties   BS EN 10219 part 2:2006

For dimensions of recommended bolt back marks and bolt centres in section - refer to Bolt centres

Links to sites with steel section dimensions/properties
  1. Tata Steel (ex Corus)... This site provides all the information you need for structural design
  2. xcalcs... Section information and Calculations
  3. Europrofil...Detailed Sections Based on European Codes (german) -using via google -> translating function helps
  4. Technouk...Various Spreadsheet Downloads- including comprehensive section properties tables
  5. Cadoss...A site dedicated to structural design - includes downloads and CD's



This Page is being developed

Home

Send Comments to Roy Beardmore

Last Updated 24/01/2013