Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECHX clone of ROYMECH

Click arrows to page adverts

Home

Index of ISO Hole and Shaft tolerances/limits pages


Relevant Standards
BS EN 20286-1:1993(ISO 286-1:1988 )...... ISO system of limits and fits. Bases of tolerances, deviations and fits
BS EN 20286-2 : 1993(ISO 286-2:1988 ).... ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts

Notes

The tolerance of size is normally defined as the difference between the upper and lower dimensions.

The need for tolerances to be identified on drawings is vital to allow assembly of parts in the desired way and interchangeability of parts as required in modern manufacturing methods.

ISO 286 implements 20 grades of accuracy to satisfy the requirements of different industries.

  • IT01,   IT0,   IT1,   IT2,   IT3,   IT4,  IT5,  IT6.. Production of gauges and instruments.
  • IT 5,   IT6,   IT7,  IT8,  IT9,  IT10,  IT11,  IT12...Precision and general Industry.
  • IT11,   IT14,   IT15,   IT16..Semi finished products
  • IT16,   IT17,  IT18 ..Structural Engineering
Hole and Shaft tolerance tables- Using Fundamental Deviations and Tolerance Band T
ISO Tolerance Band T
(3-315mm size) 		ISO Shaft limit nearest Zero
(3-500mm shaft size) 		ISO Hole Nearest limit nearest Zero
(0-500mm hole size)
ISO Tolerance Band T
(315-3150mm size) 		ISO Shaft limit nearest Zero
(500-3150mm shaft size) 		ISO Hole Nearest limit nearest Zero
(500-3150mm hole size)

Examples in using above tables..

Note: The tolerance band T is an absolute length value it does not have a negative value.

Hole Dia 110mm H11,...
Nearest zero ( El )= 110mm + 0mm = 110,000mm ...
Furthest from zero ( ES )= 110mm + (0+ T=0,220)=110,220mm
Resulting limits 110,000/110,220

Shaft 110mm e9...
Nearest zero ( es ) = 110mm - 0,072=109,928mm...
Furthest from zero ( ei ) = 110mm - (0,072 + T=0,087) = 109,841mm
Resulting limits 109,928/109,841

Note for the tolerance bands which can be either side of zero, (J,K,N,j )
The diagrams provided with the table clearly show calculation needed.e.g. consider Hole 300K7.

T= 52 micrometres (0,052mm). Limit nearest zero ( K ) ES = 16 micrometres = (0,016mm)
Limit furthest from zero ( K ) El = (0,016- 0,052)= -0,036
Limits therefore (300 -0,036) = 299,964..and ...300+0,016= 300,016
limits 299,964/300,016

Hole and Shaft Tolerances to ISO 286-2
ISO Hole Limits (3-400mm Hole Size) ISO Shaft Tolerance(3-400mm Hole Size)
ISO Hole Limits (400-3150mm Hole Size) ISO Shaft Tolerance(400-3150 mm Hole Size)


Example limits and fits using hole basis
Description Hole Shaft
Loose Running H11 c11
Free Running H9 d9
Loose Running H11 c11
Easy Running - Good quality easy to do- H8 f8
Sliding H7 g6
Close Clearance - Spigots and locations H8 f7
Location/Clearance H7 h6
Location- slight interference H7 k6
Location/Transition H7 n6
Location/Interference- Press fit which can be separated H7 p6
Medium Drive H7 s6
Force H7 u6

Machining Process associated with ISO IT Tolerance Grade..
  
IT Grade 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Lapping                              
Honing                              
Superfinishing                              
Cylinderical grinding                              
Diamond turning                              
Plan grinding                              
Broaching                              
Reaming                              
Boring, Turning                              
Sawing                              
Milling                              
Planing, Shaping                              
Extruding                              
Cold Rolling, Drawing                              
Drilling                              
Die Casting                              
Forging                              
Sand Casting                              
Hot rolling, Flame cutting                              


Useful Links.
  1. Wisetool Tables of limits and fits.
  2. MITCalc...Downloadable Excel Programmes..Including Tolerances. Reasonable Prices
  3. openpdf .... Collection of relevant links
  4. ISO Holes ..ISO Shafts .... ABC Tribology- Tables of ISO limits

This Page is being developed

Home

Send Comments to Roy Beardmore

Last Updated 18/01/2013